|
Still deciding? Get samples of $ !
Request Sample
|
| Customization: | Available |
|---|---|
| Transfer Type: | Water Transfer |
| Application: | Ceramics, Metal, Mark Cup, Leather, Glass, Wood |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1.Print out the picture according to the photo parameters the glossy is the printing surface. |
| 2.Dry the ink by nature or by hair dryer. |
| 3.Spray varnish (clear lacquer paint) on the printed surface uniformly. |
| 4.Dry the sprayed varnish by nature or hair dryer. |
| 5.Cut the prints along the edge by 1mm from the pattern. |
| 6.Soak it in water for about 30-60 seconds , then slide the coating and paper adequately by nature. |
| 7.Spread the base paper slowly to make the transfer printing coating stick to the product surface. |
| 8.Damp and soft the alabaster paper , discharge the bubble and water in the film sufficiently , and then dry the surface by absorbent paper. |
| 9.Bake it in the oven for 10-15 minutes at the temperature of 100-110 degrees , or dry it by nature for 1-3 days. |
){kind=link}