Specification
| Item No. |
STM-M10F2 |
| Printing size |
38x38, 40x50, 40x60, 50x60, 50x70 and other customized sizes |
| Voltage |
110V / 60Hz, 220V /50Hz |
| Power |
2200W, 2350W, 2600W, 3000W, 3500 w |
| Temperature range |
0-399 ºC |
| Time range |
0-999 s |
| G.W. |
33, 39, 41, 54, 60 kg |
| Packing dimension |
52x30x36, 72x44x39, 78x68x46, 84x80x66, 90x105x75, 105x120x80cm |
| Packing |
Strong carton box with foam inside |
| Includes |
1 sheet silicone pad, 1 sheet sheets(Accept Coated requirement) |
Product Display
Feature:
1. Digital LCD timer and temperature control makes setting more accurate.
2. An audible alarm will sound when time is complete.
3. Aluminum heating plate makes heating uniformly on the surface.
4. Coated element is non-stick, preventing scorching of transfers
5. High Pressure let you make a better result on the garment.
6. Full-range pressure-adjustment knob allows the pressure to be adjusted easily.
7. Clamshell configuration can saving space for transfer.
8. Rigid steel frame industrial strength and durability allows for long-term use.
Warranty:
You can rest assured that we will offer good after-sale service :
The machine enjoys one year warranty, lifelong online technical support.
We provide free parts when problems occur within one year, not including shipping cost.
we also offer good quality: all the machine of our factory have been approved by CE.
Please note:
1. You should switch off the power when you don't use it. Don't heat nothing for a long time.
2. Avoid touching the heat press plate when you operating in case be injured.
3. If you feel the pressure is too much and it is hard to be pressed, or the pressure is not enough and it is too easy to be pressed, please adjust the pressure adjusting knob, decrease / increase the shrink of the spring. The intensity of the machine will be injured if the pressure is too much.
4. A successful print requires right time, temperature and pressure, the thickness of the fabric, even the type of printing paper, all will affect the performance of printing. Any kind of sublimation paper need be tested before mass production.
5. Keep children away from the machine even when the machine is left unused.
Operation Procedure
1. Check the voltage before using it. Then turn on the power supply!
2. Plug in, turn on the power switch of machine, the power indicator lightened.
3. Set the thermostat to the temperature needed, set the timer to the needed.
4. Place the clothes to the main plate, cover the printing paper (please note the right surface of the paper). Press the handle down until reach terminal.
5.When the time come down to over, the buzzer alarms, pull the handle back.
6.If it is cold-ripping of the transfer paper, please use blackboard wiper to rub against the whole transfer paper, wait for 5-10 seconds, then rip off the transfer paper. If it is the hot-ripping of the transfer paper, you can rip off the paper immediately.
About Us:
Established in 2009, Suntek Print Co., Ltd. is a high-tech enterprise integrated in R&D, manufacture and trade on various transfer printing machines & consumables.
Our products are mainly as follows:
1.
Heat press machines
3D sublimation vacuum machine, roller sublimation machines, heat press for t-shirt, mug, plate, cap etc.
2.
Transfer consumables
sublimation paper, heat transfer paper, water decal paper, sublimation ink, sublimation blanks etc.
3.
Sublimation blanks
such as mugs, mobile phone cases, plates, sublimation stone, and sublimation crystals and so on.
These products are widely used in fabric printing, digital printing and DIY gifts of t-shirts, mugs, phone cases, plates, crystals and so on.
We always keep developing high-quality competitive new products which has enjoyed a good reputation among our customers worldwide.
Welcome all types of companies and personal fans to contact us with your requirements. We also receive domestic and foreign OEM orders.
Contact Information :
If you have any question, please feel free to contact us.
Miss Jocie Lee
Audited Supplier 
){kind=link}